If you have a Legacy

This video is the basic process for a 98-01 impreza and although the specifics may change the overall process does not. If you have any questions please contact us before removing harness. 

1991 - 1994 Legacy

From your 91-94 Subaru you'll just send us the main dash section plus the driver side fender section. Take off the dash, the bar, and the boxes behind it. What's left is the harness that runs along the firewall from door to door and 2 grommets that go out into the engine bay. Pull everything from the engine bay side into the cabin and unplug before it goes down under the carpet on the passenger's side. You can separate the harness going to driver's side fender to remove it, but we will need the front portion of the harness with the engine bay fusebox and headlights. If you plan on doing a cluster swap, we'll need the harness that runs through the upper part of the dash. Keep track of how you pull it out, you'll put it back in the exact same way. We suggest taking pictures and/or labeling as you go. 

1995 - 2001 Legacy

From your 95-01 Subaru you'll just send us the main dash section. Take off the dash, the bar, and the boxes behind it. What's left is the harness that runs along the firewall from door to door and 2 grommets that go out into the engine bay. Pull everything from the engine bay side into the cabin and unplug before it goes into the driver's side fender and before it goes down under the carpet on the passenger's side. If you plan on doing a cluster swap, we'll need the cluster sub harness as well. Keep track of how you pull it out, you'll put it back in the exact same way. We suggest taking pictures and/or labeling as you go. 

1997 - 2001 Legacy Harness

2002 - 2004 Legacy

From your 02-04 Subaru you'll just send us the main dash section. Take off the dash, the bar, and the boxes behind it. What's left is the harness that runs along the firewall from door to door and 2 grommets that go out into the engine bay. Pull everything from the engine bay side into the cabin and unplug before it goes into the driver's side fender and where it plugs into the rear harness under the front passenger seat. If you plan on doing a cluster swap, we'll need the cluster sub harness as well. Keep track of how you pull it out, you'll put it back in the exact same way. We suggest taking pictures and/or labeling as you go.  

Note: 03 -04 will need to pull passenger side fender into cabin and send as well because there is not a plug to separate that section. 

2002 - 2004 Legacy Harness

iWIre Logo with Wording 2 - USE.jpg
0

CALL US

949-510-8278

BUSINESS HOURS

Mon - Fri: 9am - 5pm PST

OUR GOAL

iWire is here to simplify your Subaru powered project, big or small. Focus on the mechanical aspects and we'll take care of the wiring headaches for you.

Lake Forest, CA

QUICKLINKS

SERVICES

ANSWERS

SHOP

© 2020 by iWire. 

  • White Facebook Icon
  • White Instagram Icon
  • White YouTube Icon
  • White Google+ Icon
  • White Twitter Icon

iWire products are proudly Made in America.