If you have an Impreza

This video is the basic process for a 98-01 impreza and although the specifics may change the overall process does not. If you have any questions please contact us before removing harness. 

1993 - 1997 Impreza

From your 93-97 Subaru you'll just send us the main dash section. Take off the dash, the bar, and the boxes behind it. What's left is the harness that runs along the firewall from door to door and 2 grommets that go out into the engine bay. Pull everything from the engine bay side into the cabin and unplug before it goes into the driver's side fender and before it goes down under the carpet on the passenger's side. If you plan on doing a cluster swap, we'll need the harness that runs through the upper part of the dash. Keep track of how you pull it out, you'll put it back in the exact same way. We suggest taking pictures and/or labeling as you go. 

1993 - 1995 Impreza Harness

1996 - 1997 Impreza Harness

1998 Impreza Harness

1998 - 2001 Impreza

From your 98-01 Subaru you'll just send us the main dash section. Take off the dash, the bar, and the boxes behind it. What's left is the harness that runs along the firewall from door to door and 2 grommets that go out into the engine bay. Pull everything from the engine bay side into the cabin and unplug before it goes into the driver's side fender and before it goes down under the carpet on the passenger's side. If you plan on doing a cluster swap, we'll need the cluster sub harness as well. Keep track of how you pull it out, you'll put it back in the exact same way. We suggest taking pictures and/or labeling as you go. 

1999 - 2001  Impreza Harness

2002 - 2004 Impreza Harness

2002 - 2007 Impreza

From your 02-07 Subaru you'll just send us the main dash section. Take off the dash, the bar, and the boxes behind it. What's left is the harness that runs along the firewall from door to door and 2 grommets that go out into the engine bay. Pull everything from the engine bay side into the cabin and unplug before it goes into the driver's side fender and where it plugs into the rear harness under the front passenger seat. If you plan on doing a cluster swap, we'll need the cluster sub harness as well. Keep track of how you pull it out, you'll put it back in the exact same way. We suggest taking pictures and/or labeling as you go.  

Note: 03 -07 will need to pull passenger side fender into cabin and send as well because there is not a plug to separate that section. 

2005 - 2007 Impreza Harness

iWIre Logo with Wording 2 - USE.jpg
0