If you have a Forester

This video is the basic process for a 98-01 impreza and although the specifics may change the overall process does not. If you have any questions please contact us before removing harness. 

1999 - 2002 Forester Harness

1998 - 2002 Forester

From your 98-02 Subaru you'll just send us the main dash section. Take off the dash, the bar, and the boxes behind it. What's left is the harness that runs along the firewall from door to door and 2 grommets that go out into the engine bay. Pull everything from the engine bay side into the cabin and unplug before it goes into the driver's side fender and before it goes down under the carpet on the passenger's side. If you plan on doing a cluster swap, we'll need the cluster sub harness as well. Keep track of how you pull it out, you'll put it back in the exact same way. We suggest taking pictures and/or labeling as you go. 

2003 - 2007 Forester

From your 03-07 Subaru you'll just send us the main dash section. Take off the dash, the bar, and the boxes behind it. What's left is the harness that runs along the firewall from door to door and 2 grommets that go out into the engine bay. Pull everything from the engine bay side into the cabin and unplug before it goes into the driver's side fender and where it plugs into the rear harness under the front passenger seat. If you plan on doing a cluster swap, we'll need the cluster sub harness as well. Keep track of how you pull it out, you'll put it back in the exact same way. We suggest taking pictures and/or labeling as you go.  

Note: 03 -07 will need to pull passenger side fender into cabin and send as well because there is not a plug to separate that section. 

2003 - 2007 Forester Harness

iWIre Logo with Wording 2 - USE.jpg
0